Every SunCatchery piece is frosted back printed acrylic: a sheet of 3mm clear acrylic with the design printed on its frosted back, then cut to the outline of the artwork. It is a small choice that you cannot see at first glance, but it shapes how the piece looks in your window, how it handles sunlight, and how well it holds up to everyday life. Here is why we make them this way.
The clear front of frosted back printed acrylic acts like a glaze over the print
When you look at a suncatcher, you are looking through the clear front of the acrylic to reach the print on the back. That front layer works a lot like the glaze on a ceramic mug or a coat of varnish on a painting. The colour sits underneath, and a smooth, clear surface sits on top.
This does a few good things. The surface you see is slick and even, so the colours look deep and clean instead of flat. Fine details in the artwork, like the spot where a dark outline meets a pale petal, look crisp because there is a clear layer between your eye and the ink. The front also gives the piece a soft shine when you look at it from across the room.
It also means the print is not the outermost thing on the piece. We will come back to why that matters when we talk about cleaning.
Acrylic is not glass, and we never describe it that way. It is lighter, it does not shatter, and it is easy to cut to the exact outline of a design. That cut is why a fox, a moon or a maple leaf hangs as its own shape instead of as a square panel.
How the frosted side catches and spreads light
The back of the sheet is frosted, which means it has a fine, slightly rough surface instead of a glossy one. Rough surfaces scatter light. Instead of the sun passing straight through in one hard beam, the frosted layer breaks it up and spreads it across the whole piece.
That is why a suncatcher glows rather than looking like a coloured sticker on a window. The printed colours are lit from behind by daylight, and the frosting evens that light out so the glow reaches the edges and not only the middle. A pale yellow looks warm, a deep blue looks rich, and you do not get one harsh bright spot in the center of the design.
If you add the optional cut crystal drop, it hangs below the acrylic piece and does a different job. The acrylic gives the glow of colour. The crystal drop is what throws rainbows, and only when direct sun reaches it. On a cloudy day you will still get the glow, but the rainbows will wait for the sun to come back.
That is also why placement matters. We hang each piece from a chain, from one point, high in a window that gets direct sun for part of the day. A small suction hook is enough because acrylic is light.
Why the print is protected from your cloth
Here is the practical payoff. Because the design is printed on the back, the surface you touch is the clear front. When you wipe a suncatcher, your cloth moves over plain acrylic, not straight over the ink.
Care is simple. Keep these points in mind:
- Use: a soft cloth, dry or slightly damp, and plain water only.
- Avoid: glass cleaner, alcohol and abrasive pads or scrubbers.
Those products can cloud acrylic and wear the print, so it is best to leave them under the sink. Dust is the most common thing you will need to wipe off, and a dry cloth usually handles it. You can find the full routine, along with advice on where to hang a piece, in our guide to suncatcher hanging and care.
Even with the print behind a clear front, a gentle hand is still the right approach. The front protects the colour from daily contact, but it is not a reason to scrub.
Looking at it from the room and from outside
A suncatcher in a window is seen from two sides, and printing on the back means each side has its own look.
From inside the room, you see the clear front with the colours showing through it. When the sun is behind the piece, light passes through the frosted layer and the colours glow. This is the view most people spend their time with, and it is the one we design for.
From outside, you see the frosted side, where the design has a softer, matte face. It is a quieter look than the glossy front, and it can be a nice detail for a neighbor or a passerby walking by.
So choosing where to hang a piece is also choosing which side faces the room. Most people hang the clear front toward the inside, because that is where you sit, cook and drink your coffee. If you like, you can look at it both ways on a sunny afternoon and see which you prefer.
Each piece is made to order by Merchize. Allow 2 to 3 business days to make it, then 5 to 10 business days for delivery. Shipping is US only, and it is free within the US. If you would like to see how different designs look on a frosted back, you can browse all of our suncatchers and pick the one that suits your window.